Instrument panel and headlight brackets

770

Total noob
Location
EE
Hi guys,

if anyone still wants a headlight and/or an instrument panel bracket, I still have some left.

Both brackets are made of 5 mm thick aluminium and anodized to matt black. All fixing hardware is included and no changes to the triple clamp or frame is required.

Instrument panel bracket and hardware is 50€. Shipping to UK and EU is 11.20€, to USA is 14.95€.
Headlight bracket and hardware is 55€. Shipping to UK and EU is 16.90€, to USA is 21.50€.
Shipping both brackets together to UK and EU is 16.90€, to USA is 21.50€..
For EU individuals, VAT is added to the price of the brackets.

If these brackets are of interest, please email me at himalayan@krown.work

Krownwork_REH_headlight-and-instrument-panel-brackets_01.jpgKrownwork_REH_headlight-and-instrument-panel-brackets_05.jpgKrownwork_REH_headlight-and-instrument-panel-brackets_06.jpgKrownwork_REH_headlight-and-instrument-panel-brackets_04.jpgKrownwork_REH_headlight-and-instrument-panel-brackets_02.jpgKrownwork_REH_instrument-panel-and-headlight-brackets_1.jpgKrownwork_REH_instrument-panel-and-headlight-brackets_2.jpgKrownwork_REH_instrument-panel-and-headlight-brackets_3.jpgKrownwork_REH_instrument-panel-and-headlight-brackets_4.jpgKrownwork_REH_instrument-panel-and-headlight-brackets_6.jpg
 
Last edited:

Roy Gavin

Well travelled
These brackets are excellent quality and fit , and also give you a better choice of windscreens as most screen designed to be fitted to a conventional headlamp with a two bolt pivot fixing can be used.
I already had a Givi A210 on another bike which I trial fitted to the Hima and it works well on the Hima too.
It is around 60 mm wider and 90 mm higher with a more pronounced flip so much less wind, noise and turbulence.
Looks OK too, but I am too old and dumb to post photos--!
 

Curt Meinecke

Well travelled
Location
Kansas, USA
Hello everyone, it's been a while!

I was asked for the instrument panel bracket I did a few years ago. Unfortunately, they were all sold, so I decided to make a new batch and update the design to fit the 2020 model as well. In addition, I also designed the headlight bracket (see CAD drawings).
Time for a stupid question. What is the purported of the headlight bracket? Is it just a better quality bracket, or is it to be used to install an aftermarket headlamp.

The brackets look great!
Thanks.
 

Roy Gavin

Well travelled
The instrument brackets are used to support the instruments when the tank racks are removed.
But the racks also support the headlight and the screen, so a couple of proprietary headlamp brackets are required to support the headlight , and not all work or look as well as they might.
And the good ones are expensive.
Hence the professional looking headlamp bracket which looks OEM quality,
That only leaves the screen , all that is needed is a couple of Y brackets with a couple of holes for the screen fixings at the top and a slot on the bottom to fit over the headlight bolts.
And perhaps a few spacers--!
 

Roy Gavin

Well travelled
Maybe a slight reduction in wind noise, but I replaced the faring at the same time so how much of the reduction is the screen and how much the rack is not clear.
Also reduces the gap between the screen and the rider if you fit the existing screen to the new headlight brackets, and that usually helps with turbulence./ noise too.
 

Curt Meinecke

Well travelled
Location
Kansas, USA
Maybe a slight reduction in wind noise, but I replaced the faring at the same time so how much of the reduction is the screen and how much the rack is not clear.
Also reduces the gap between the screen and the rider if you fit the existing screen to the new headlight brackets, and that usually helps with turbulence./ noise too.
Thanks
 
Well, i’ve ordered and paid for my set of Instrument panel and headlight brackets ...
Connor has written the software (solidworks) for the mounting brackets for the original and small Hitchcock's screens, the files are available as DFX , STL etc for a nominal charge ... or just buy the brackets off him ..£10 / set ... It’s so much simpler.
The plan is to do a strip and fit video for YouTube which will include the installation of the screen brackets ...
The GPS mount will be removed as this is the UK ... getting lost is not an option ... :)
 
Last edited:

Eatmore Mudd

Moderator
Staff member
Well, i’ve ordered and paid for my set of Instrument panel and headlight brackets ...
Connor has written the software (solidworks) for the mounting brackets for the original and small Hitchcock's screens, the files are available as DFX , STL etc for a nominal charge ... or just buy the brackets off him ..£10 / set ... It’s so much simpler.
The plan is to do a strip and fit video for YouTube which will include the installation of the screen brackets ...
The GPS mount will be removed as this is the UK ... getting lost is not an option ... :)
I'm very interested to see the result ! Do share :giggle:
 

grymsr

Well travelled
Location
Maine
I'm techno challenged so bare with me, but does this allow the headlight to follow were the front wheel is pointed?
 
Top Bottom