• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

I installed the Hitchcocks USB charger.

Finklejag

Well travelled
I was eyeing the SRC Moto one since I bought my bike and they were out of stock for months. When it was back in stock they raised the price to $208. Nope! So Hitchcocks has been working on one for a while and it finally hit the market. I know some people might think $108 is way too much to spend on an USB charger but I don’t know much about wiring and such. It was super easy to install being plug and play, no wire splicing or tapping. The hardest part was removing the handle bar clamp bolts because of the factory red Loctite. I just sprayed them with WD-40 and got them off without snapping them.
 

Attachments

Robert

Well travelled
Location
Holland
I have a usb-charger at the same location, made from 2 mill thick aluminium flat with two holes: one for the top M8 bolt and a bigger hole for the charger. The charger came from Ali and also had a voltmeter attached that I still have to find a place for. Wired the charger directly to the battery, even though there is a little led-light on the charger that burns all the time. Even after a week or two the bike still starts fine, no problems there. All in all costed me around 15 euro's and three hours of quality time. I had to make the aluminium holder twice because the first one was not the best.
Yours looks very neat .
 

puttbutt

Well travelled
Location
NY
I was eyeing the SRC Moto one since I bought my bike and they were out of stock for months. When it was back in stock they raised the price to $208. Nope! So Hitchcocks has been working on one for a while and it finally hit the market. I know some people might think $108 is way too much to spend on an USB charger but I don’t know much about wiring and such. It was super easy to install being plug and play, no wire splicing or tapping. The hardest part was removing the handle bar clamp bolts because of the factory red Loctite. I just sprayed them with WD-40 and got them off without snapping them.
is the USB charger always on? or is it off when you turn the bike off?
 
Top Bottom