• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

Bullet charging system

Gidday, my 96 500 Bullet does not charge correctly, have checked output from 4 wire alternator, Amber and yellow wires 16 volts at 2000 revs. Violet wires 7 volts at 2000 revs, disconnect the rectifier and get minimal increase reading on the ammeter. After a long ride,180 km. If I have the lights on the bike dies, turn off the lights and she keeps running, this tells me the battery is not getting a full charge and we are running on alternator charge . Any ne know why we have two charging circuits? Can I swap them over?
Any ideas gratefully received.
 

Eatmore Mudd

Moderator
Staff member
My recollection is a little fuzzy on the changes over the years and when the were implemented.
One circuit is for the headlight and the other provides power to fire the ignition system and charge the battery.
 
Top Bottom