Any equivalent options for Doubletake mirrors?

[VStarRider]

I am ready to purchase mirrors for my '21 Himmy. I am 6'1" and too tall for the stock mirrors, even with the adapters purchased from Amazon. I feel the current setup is unsafe as I have to bend my back and head down to get a view behind me.

I am ready to buy Doubletake mirrors, but, they are expensive. Before I make the move, doing a final check for alternatives?

 

[XRN]

Looking into this too, I am three inch taller than you!
I am looking at a set from Amazon when I fit the, I will let you know. There is a double jointed set which are expensive and a cheaper single joint set for much less.

 

[Napom]

Take the plunge! Santa brought me double takes and I love them . . . You can see them on my bike from the rider perspective in the below video, and hear how much I rave about them a couple of times in the video. Honestly one of my favorite mods so far!

 

[XRN]

Yup, they are the expensive double joint. I am getting the similar ones from Alchemy parts store for £35.

 

[Roy Gavin]

The $17- trapazoidal ones on Ali etc are CCC/E9 certified so OEM quality and they perform perfectly, stable, vibration free and with an excellent field of view.
And, in Oz $260- cheaper than Dt's.

 

[XRN]

Take the plunge! Santa brought me double takes and I love them . . . You can see them on my bike from the rider perspective in the below video, and hear how much I rave about them a couple of times in the video. Honestly one of my favorite mods so far!

Got a set of the tank paniers too. Brilliant addition.

 

[VStarRider]

Yup, they are the expensive double joint. I am getting the similar ones from Alchemy parts store for £35.

I am on the Alchemy store website - which ones are you getting? I want to check them out.

 

[XRN]

I am on the Alchemy store website - which ones are you getting? I want to check them out.

These ones. Cheap enough for a punt.

 

[Roy Gavin]

Nope, the are a little too small and vibrate a fair bit too too - if you want to take a punt the cheap plastic ones the same shape are larger with a better field of view and less vibration- DAHIK

 

[Flicka]

The $17- trapazoidal ones on Ali etc are CCC/E9 certified so OEM quality and they perform perfectly, stable, vibration free and with an excellent field of view.
And, in Oz $260- cheaper than Dt's.

Have you a link?
thanks in advance

 

[Roy Gavin]

Was almost two years ago, not home right now, I will have a look for the invoice when I get back.
https://www.aliexpress.com/item/1005002466826032.html?spm=a2g0o.productlist.0.0.524b9798UIjoHm&algo_pvid=adb7a291-c56a-4e3f-8635-8b389d59da20&algo_exp_id=adb7a291-c56a-4e3f-8635-8b389d59da20-5&pdp_ext_f={"sku_id":"12000020757898188"}&pdp_pi=-1;20.87;-1;-1@salePrice;AUD;search-mainSearchyou
These are the guys I bought them from, but I don't see the exact model I bought back then , but I got five adaptors and I could read the CCC/E9 on the back.

 

[Kiwiscoot]

These ones. Cheap enough for a punt.

I have those ones now for more than 20 000kms with no vibration or any other issues. Nice thing about them is that I fold them back when I am riding a route where the risk of dropping the bike is high.

 

[XRN]

Mybset have arrived. I will do some comparison pics and a ride review. But above sounds very promising.

 

[XRN]

Similar size. Not fitted yet, hopefully in the evenings this week, if I get time.

 

[disugarte]

Regardless of the size, the shape itself is a huge improvement imho

I'm still eager to try the AliExpress ones