• NEW USERS: If you haven't received your Confirmation Email: There has been an ongoing issue with the forum's send mail function and many new users haven't received the email to confirm their registration. I've done my best to manually process these, so there's a good chance if you've signed up in the past 30 days that you've already been validated and can proceed with posting on the forum (don't forget to introduce yourself!). If you still can't get in, please use the Contact Us link on the bottom of any page to send me a message and I'll process you manually. Thanks for your patience! ~Jerk

Search results

  1. 3

    bullet Electra engine not firing

    Hello , Battery is fully charged, Got spark at the plug, petrol getting through (can see it on the plug). I am kicking it and kicking it but nothing. Maybe I am not kicking the engine over fast enough! I could do with a "Paddock motorcycle starter". Electric starter and associated parts removed...
  2. 3

    Bullet Electra x 500 Gaskets

    Hello, Are head and barrel gaskets the same as for normal bullet 500 models? They look the same to me. OR Are they different thicknesses etc ? Thanks
  3. 3

    bullet Electra 500 2008 model ------------ Piston I.D.

    Hi, I have got the following numbers/letters stamped on top of the piston --- A 71c B12 E 105 Any idea ,what they mean? All I want to know is, if it's std. size or bigger? Thanks
  4. 3

    bullet Electra 500 head removal

    Hello, I want to take the cyl head off to check the valves etc. as the compression is low (80 ibs/sq.") But I don't have the special tool ST25117-4 to take the rocker spindle out. Has anyone taken the spindle out without this tool? OR where can I buy this tool from? Thanks in advance.
  5. 3

    bullet Electra x

    Hello, what should the engine compression pressure be for the Bullet Electra x 500 ? I am getting 90 psi on mine. I have spark at the plug, fuel going through (wet plug),air cleaner is clean, can't get the engine to fire. Kick starting it (electric starter taken out by previous owner). Any help...
  6. 3

    Electra ammeter

    Hi All, Should the ammeter zero when at tdc . I have the 2008 Electra 500. There's no movement at all on mine. Thanks
  7. 3

    clutch query--bullet 500 5speed 2008 model

    Hello, I have dis-mantled my clutch because it was not dis-engaging and found only 4 friction plates ? Shouldn't there be 5 in the 5 speed model ? One other thing, is the clutch plate unit same for 4 or 5 speed models? Would I be able to fit another friction plate in there? Advice greatly...
  8. 3

    Bullet Electra TCI Unit

    Hello, Can anyone with a Bullet Electra x model post a close up photo(s) of the TCI Unit fitted on the bike? Thanks in advance.
  9. 3

    handlebar lever brake switch

    Hello, bullet Electra 2008 model I need to replace the lever brake switch but I can't see what's holding the damn thing in place. No screw or circlip ? Anyone any experience of changing one? Any ideas/info appreciated. Thanks
  10. 3

    Pulser/Pickup coil

    Hello, Re-2008 bullet Electra 500 avl engine I got a reading of 107 ohms from the white and white/green wires plug at the TCI unit which comes from the pulsar coil. I read somewhere that the reading should be 190-220 ohms. Could this be the reason of a weak/non-existent spark at the spark...
  11. 3

    TCI UNIT for 2008 bullet Electra

    Hello, I have a 1998 bullet Electra 500 avl engine . I need a TCI unit for it. Does anyone know if same TCI unit is fitted on 350/500 cc Electra models? I have attached a couple of photos of the type of connectors on the unit. It has 2 connectors for 2 & 3 wire connectors. The TCI unit sold by...
  12. 3

    lights/horn/indicator switch

    Hello, I need to dismantle the above mentioned switch. It's on a 1992 bullet 350 (Indian) The switch that you slide up/down etc. for the lights, is it just pushed on to the inner metal tag ? I can see a metal pin through this part but you can't push it out as the other side is closed ? Has...
  13. 3

    bullet 350 1992 model (indian)

    Hello, I am replacing the downpipe on my bullet 350,my query is , should there be a sealing ring/gasket on the pipe joint with the engine block? Thanks in advance.
  14. 3

    setting the timing

    Hello, I have a 1992 Bullet 350 fitted with Boyer Bransen electronic ignition but it won't start. What I would like to clarify is --- should this unit be set up with the piston at TDC or 0.8mm BTDC ? Any tips would be appreciated. Thanks
Top Bottom